Spring is about to arrive, and the longer days will inspire business owners to get outdoor projects underway. But before getting started, it is important to be aware of the electrical safety hazards you may encounter.
“Starting on outdoor projects is a great way to welcome the warmer weather, but it’s crucial to be aware of potential electrical hazards at home,” said Tim Frankenberg, fire safety engineer for the St. Louis-based Ameren Corporation. “A little prevention goes a long way in keeping your family safe.”
The St. Louis-based Ameren Corporation recommended four electrical safety hazards to avoid this spring:
Electric equipment near water
Water and electricity don’t mix, so a great rule of thumb is to keep electric equipment at least 10 feet away from wet areas. You should also plug into ground fault circuit interrupters (GFCIs), which are designed to shut off the power as needed to prevent a shock. These are typically found in kitchens, bathrooms, garages and outdoors. It is highly encouraged that GFCIs are tested monthly.
Underground utilities
You can disrupt utility service, including electric, natural gas and more, and even put your life in danger by failing to have underground utility lines clearly marked before digging. Plan the simple do-it-yourself projects that may seem small, including planting trees or installing a mailbox.
Overhead power lines
Stay clear of power lines and wires when trimming vegetation, raising ladders and performing outdoor home maintenance. Always assess your surroundings while trimming or working in your yard or simply call a certified professional to safely handle the work. Remain at least 10 feet away from any overhead power line near your home.
Indoor electrical cords and electronics for outdoors
Before plugging into an exterior electrical socket, double-check that your cords, lights or fans are rated for outdoor use. Look for labels on packaging that clearly mark them as suitable for outdoor use. Also, avoid running cords through door or window openings where they can be damaged, and pair them with GFCIs instead.
